Amer Networks SRPM24 - Manual (Page 17)

SRPM24
CLI Management
The system supports the console management—CLI command. After you log in on to the system, you will
see a command prompt. To enter CLI management interface, type in “enable” command (or simply enter
“e” and press Enter).
Commands Level
Modes
Access
Method
Prompt Exit Method About This Mode
User EXEC
Begin a session
with your device.
SRPM24>
Enter logout
or quit.
The user commands
available at the user level
are a subset of those
available at the privileged
level.
Use this mode to
• Perform basic tests.
• Display system
information.
Privileged
EXEC
Enter the
enable
command while
in User EXEC
mode.
SRPM24#
Enter disable
to exit.
The privileged command is
the advanced mode.
Use this mode to
• Display advanced
function status
• Save configuration
Global
Configuration
Enter the
configure
command while
in privileged
EXEC mode.
SRPM24
(config)#
To exit to
privileged
EXEC mode,
enter exit Use this mode to configure
those parameters that are
going to be applied to your
device.
PoE
Configuration
Enter the poe
command while
in User EXEC
mode
SRPM24
(poe)# Enter exit to
exit. Use this mode to configure
PoE parameters.
UPS
Configuration
Enter the ups
command while in
User EXEC mode
SRPM24
(ups)# Enter exit to
exit. Use this mode to configure
UPS parameters.
16