Airmar PB200 - Manual (Page 42)

PB200 WeatherStation User Manual revision 1.000
Proprietary and Confidential
36
PGN
126720-50
(0x1EF00)
Proprietary: Enable GPS Type 0
Messages
Single Frame: No Priority: 7/Y/N Update Rate: 0/N/N Destination: Address Query Support: Yes Access Level: 0
Field
#
Name
Request
Param.
DD DF Type Resolution Value Remark
1 Manufacturer Code Yes DD172 DF52 11 bits 1 135 (decimal) Manufacturer Code for Airmar Technology.
2 Reserved bits No DD001 DF52 2 bits 1 0x3 All bits set to logic "1"
3 Industry Group Yes DD168 DF52 3 bits 1 4 (decimal) Industry Group for "Marine Industry".
4 Proprietary ID (PID) Yes DD005 DF53 uint8 1 bit 50 (decimal) 50 = Enable GPS Type 0 Messages
5 Enable GPS Type 0 Messages Parameter No N/A N/A uint16 1 bit 0=Ignore type 0 message for
60 seconds
1-39=Enable type 0
messages as data
255=Ignore type 0 messages
(default)
65535=Data Not Available /
Do Not Change
This command can be used to direct the
GPS how to handle type 0 messages.
This value is NOT stored in Eeprom, but
is changeable with the Command Group
Function PGN 126208.
Notes
This PGN is transmitted in response to a PGN 126208 Request Group Function message. Fields 1, 3, and 4 must each be fully specified in the request in order for this PGN to be
transmitted.
This PGN does not respond to ISO Requests (PGN 59904).
This PGN performs the same function as the received NMEA 0183 sentence $PAMTC,OPTION,5,XXX.