Airaid 1027 User Manual
Page 2
Instructions Revision
10.08.14
ECONOAID 2688 E Rose Garden Ln. Phoenix, AZ 85050 (888) 876-4676 www.ECONOAID.com
5. Reinstall the intake tube, and any other parts that were re-
moved to gain access to the throttlebody in the reverse order
in which they were removed.
Double check your work. Make sure there is no foreign mate-
rial in the intake tract. Make sure all clamps, connectors, hos-
es, nuts, and bolts are secure.
4. Pull the throttlebody away from the intake manifold and
Install the ECONOAID Throttle Booster and supplied gasket.
The logo is to be facing the throttlebody and in the 12:00
o’clock position. the supplied gasket, is to be on the throttle-
body side of the ECONOAID.
5. Align the bolt holes, and reinstall the factory bolts. Tighten
the bolts to the factory specifications in an “X” pattern. Before
starting the engine, manually cycle the throttle plate to make
sure there are no obstructions.
- 883-283 (7 pages)
- 200-585-1 (2 pages)
- 200-583 (2 pages)
- 300-561 (2 pages)
- 400-531 (2 pages)
- 200-512-1 (2 pages)
- 200-555 (2 pages)
- 200-543 (2 pages)
- 200-557 (2 pages)
- 200-580 (2 pages)
- 200-584 (2 pages)
- 200-586 (2 pages)
- 200-589 (2 pages)
- 200-617 (2 pages)
- 200-612-P (2 pages)
- 200-615 (2 pages)
- 200-630-1 (2 pages)
- 250-634 (2 pages)
- 300-560 (2 pages)
- 300-562 (2 pages)
- 300-564-P (2 pages)
- 300-563 (2 pages)
- 300-565 (2 pages)
- 300-567 (2 pages)
- 300-568 (2 pages)
- 300-570 (2 pages)
- 300-573 (2 pages)
- 300-574 (2 pages)
- 300-575 (2 pages)
- 300-577 (2 pages)
- 300-626 (2 pages)
- 300-631-1 (2 pages)
- 310-506 (2 pages)
- 300-637 (2 pages)
- 310-508 (2 pages)
- 310-509 (2 pages)
- 310-510 (2 pages)
- 310-515 (2 pages)
- 310-511 (2 pages)
- 310-616 (2 pages)
- 310-618 (2 pages)
- 350-532 (2 pages)
- 350-635 (2 pages)
- 400-516 (2 pages)
- 400-507 (2 pages)