Airaid 1027 - Manual

Parts List
#1 ECONOAID x1
#2 Gasket x1
1. Locate and loosen the intake tube clamps on both the throt-
tlebody and the airbox. Remove the factory intake tube and
set it aside. It may be necessary to remove the engine cover to
gain access to the throttlebody on some applications.
Thank you for purchasing the ECONOAID Throttlebody Booster. Please read the instruction manual carefully before pro-
ceeding with the installation. Contact ECONOAID @ (888) 876-4676 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit
or instructions that are not clear to you. Your ECONOAID Throttlebody Booster was carefully inspected and packaged. Check that
no parts are missing, or were damaged during shipping. If any parts are missing, please contact ECONOAID.
Part Number 1027
2010-15 4Runner 4.0L
2010-14 FJ Cruiser 4.0L
2010-13 Sienna 3.5L
2007-14 Avalon 3.5L
2006-14 Camry 3.5L
2013-14 Camry 2.5 L Hybrid
2003-15 Venza 3.5L
2013 Rav4 3.5L
2013 –15 Highlander 3.5L
Tools Required For Installation
8mm, 10mm Sockets
Ratchet and Extension
Phillips Screwdriver
U.S. Pat. #7,665,442
These instructions depict an installation being performed on a FJ Cruiser and is meant to be a guide
for all other makes and models listed. While specific details may vary from vehicle to vehicle, the general
install procedure remains the same.
3. Remove the four bolts that secure the throttlebody to the
intake manifold. It may also be necessary to remove a wiring
bracket depending on your application.