Airaid 200-580 - Manual

1
# 200-580 INSTALLATION INSTRUCTIONS
96-05 Chevrolet/GMC S-10/S-15 4.3L
96-00 Fullsize 4.3L
Parts List
(1) Power Plate
(1) 6mm x 3 1/2” long Stud (for rear)
(2) 6mm x 60mm Bolts
(2) 6mm x 5 1/2” Studs
(2) 6mm x 50mm Bolts
(3) 6mm Nuts
(3) 6mm Flat Washers
(2) 1” long Aluminum Spacers
(1) “O”-Ring .138 diameter
Tools List
10 mm Socket
7/32 Socket
Flathead Screwdriver
Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the
instruction manual carefully before proceeding with the installation. Contact AIRAID @
(800) 498-6951 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or in-
structions that are not clear to you. Your PowerAid Throttle Body Spacer was carefully
inspected and packaged. Check that no parts are missing, or were damaged during
shipping. If any parts are missing, please contact AIRAID.
Thank you for selecting AIRAID.
Included with your Poweraid Spacer is a sticker with a California Air Resources Board
(C.A.R.B.) Executive Order (EO) number. This sticker must be placed in plain view inside of
the engine compartment. Failure to do so may prevent you from passing a smog inspection.