Airaid 400-507 - Manual

1
# 400-507 INSTALLATION INSTRUCTIONS
01-03 Ford Ranger/Explorer SportTrac 4.0L
SOHC *
Parts List
(1) Power Plate
(1)Small O-ring
(1) Large O-ring
(4) 1/4” x 2 1/2” Lag Screws
(4) 1/4” Flat Washers
(2) Extension Plates
(2) 6mm x 12mm Flat Head Screws
Tools List
1/4” Socket
7/16” Socket
Ratchet
Standard Screwdriver
5/32” Allen Wrench
* Also available for your 01-3 Ford Ranger
4.0L SOHC, the Airaid Intake System, p/n
#400-121. Call for details!
Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the
instruction manual carefully before proceeding with the installation. Contact AIRAID @
(800) 498-6951 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or in-
structions that are not clear to you. Your PowerAid Throttle Body Spacer was carefully
inspected and packaged. Check that no parts are missing, or were damaged during
shipping. If any parts are missing, please contact AIRAID.
Thank you for selecting AIRAID.
Included with your Poweraid Spacer is a sticker with a California Air Resources Board
(C.A.R.B.) Executive Order (EO) number. This sticker must be placed in plain view inside of
the engine compartment. Failure to do so may prevent you from passing a smog inspection.
* For vehicles built on or after 7-25-2000