Airaid 300-574 - Manual

1
# 300-574 INSTALLATION INSTRUCTIONS
2003-07 Dodge Dakota 4.7L
2003-07 Dodge Durango 4.7L
2006-07 Mitsubishi Raider 4.7L
Tool List
1/4 in. Ratchet
1/4 in. x 12 in. Extension
8mm Socket
10mm Socket
14mm Socket
14mm Box End Wrench
5/32 Allen Wrench
Parts List
1- Power Plate
1-“O” Ring
3- Bolts 6mm x 60mm
3- Flat Washers 6mm
1– Extension Plate (1 in.) with 6mm Threads
1– Extension Plate (1/2 in.) with 6mm Threads
1– Flat Head Screw 6mm x 20mm
1– Flat Head Screw 6mm x 34mm
1– Spacer (5/8”) with 1/4” hole
1– Throttle Cable Bracket
2– Spacers .636 Long with 3/8” hole
2– Bolts 3/8-16 x 1 1/2”
1– Nutplate
* Also available for your Dodge Dakota/
Durango 4.7L- the Airaid Intake System.
Call for details!
Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the
instruction manual carefully before proceeding with the installation. Contact AIRAID @
(800) 498-6951 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or in-
structions that are not clear to you. Your PowerAid Throttle Body Spacer was carefully
inspected and packaged. Check that no parts are missing, or were damaged during
shipping. If any parts are missing, please contact AIRAID.
Thank you for selecting AIRAID.
Included with your Poweraid Spacer is a sticker with a California Air Resources Board
(C.A.R.B.) Executive Order (EO) number. This sticker must be placed in plain view inside of
the engine compartment. Failure to do so may prevent you from passing a smog inspection.