Airaid 1028 - Manual (Page 2)

Instructions Revision
07.22.13
ECONOAID 2688 E Rose Garden Ln. Phoenix, AZ 85050 (888) 876-4676 www.ECONOAID.com
4. Pull the throttlebody away from the intake manifold and
install the ECONOAID with the supplied gaskets. The logo
should be facing the throttlebody. The supplied gaskets, are to
be on the each side of the ECONOAID. Do not re use the fac-
tory gasket.
5. Reinstall the throttlebody. Tighten the nuts to the factory
specifications in an “X” pattern. Before starting the engine,
manually cycle the throttle plate to make sure there is no ob-
structions to movement. 6. Reinstall the intake tube and airbox lid, and any other parts
that were removed to gain access to the throttlebody. Double
check your work. Make sure there is no foreign material in the
intake tract. Make sure all clamps, connectors, hoses, nuts,
and bolts are secure.
3. Remove the four nuts that secure the throttlebody to the
intake manifold. It may also be necessary to remove a wiring
bracket depending on your application.
Econoaid's come with a 123 day money back guarantee
If you decide at any time during the 123 day period
that you are not happy with your Econoaid you can
return it for a full refund
Original receipt of purchase is required for refund.
*Refund amount does not include original shipping
Gaskets