Airaid 1028 - Manual

Parts List
#1 ECONOAID x1
#2 Gaskets x2
1. Locate and loosen the intake tube clamp on the throttle-
body . It may be necessary to remove the engine cover to gain
access to the throttlebody on some applications.
Thank you for purchasing the ECONOAID Throttlebody Booster. Please read the instruction manual carefully before pro-
ceeding with the installation. Contact ECONOAID @ (888) 876-4676 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit
or instructions that are not clear to you. Your ECONOAID Throttlebody Booster was carefully inspected and packaged. Check that
no parts are missing, or were damaged during shipping. If any parts are missing, please contact ECONOAID.
Part Number 1028
2006 - 2009 HYUNDAI ELANTRA
2006 - 2008 HYUNDAI TIBURON
2006 - 2009 HYUNDAI TUCSON
2006 - 2009 KIA SPECTRA
2006 - 2009 KIA SPECTRA5
2006 - 2009 KIA SPORTAGE
2.0L I4
U.S. Pat. #7,665,442
These instructions depict an installation being performed on a Hyundai Elantra and is meant to be a
guide for all other makes and models listed. While specific details may vary from vehicle to vehicle, the gen-
eral install procedure remains the same.
2. Unclip the air box lid, slide the intake tube off of the throttle
body and lay if off to the side. Some models may have a
breather attached to the intake tube. On these models, the
breather will need to be disconnected as well.