Airaid 1022 - Manual

Parts List
#1 ECONOAID x1
#2 Gasket x1
1. Disconnect the negative battery cable!
A.) Disconnect the intake air temperature sensor.
B.) Loosen the hose clamp that secures the flexible intake tube to the
resonator.
C.) Loosen the bolt that secures the resonator to the intake manifold.
Remove the resonator from the vehicle by lifting up on the front, and
then pulling it towards the front of the vehicle.
2. Remove the four bolts that secure the throttlebody to the intake
manifold. Remove the throttlebody from the intake manifold and set
it aside. (No need to disconnect the wiring harness.)
Thank you for purchasing the ECONOAID Throttlebody Booster. Please read the instruction manual carefully before pro-
ceeding with the installation. Contact ECONOAID @ (888) 876-4676 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit
or instructions that are not clear to you. Your ECONOAID Throttlebody Booster was carefully inspected and packaged. Check that
no parts are missing, or were damaged during shipping. If any parts are missing, please contact ECONOAID.
Part Number 1022
2008-11 Dodge Dakota
2008-12 Dodge Ram
2008-09 Dodge Durango
2008-09 Chrysler Aspen
2008-10 Jeep Cherokee and
Jeep Commander
4.7L Corsair V8
2012-15 Jeep Wrangler
2012-14 Dodge Avenger
2012-14 Chrysler 200/300
2012-14 Dodge Challenger/Charger
2012-14 Dodge Caravan
2012-14 Dodge Durango
2012-14 Jeep Grand Cherokee
2012-14 Dodge Journey
2013-14 RAM 1500
3.6L Pentastar V6
B.
A.
C.
U.S. Pat. #7,665,442