Airaid 201-719 User Manual
Tools required for installation
Installation Instructions
Part Number: 201-719 Jr. Kit
2005-06 GM Full Size Trucks & SUVs
2007 “Classic” Full Size Trucks
W/4.8L,5.3L,6.0L Engines W/ Electric
Cooling Fans
Packing List:
#1
851-135
Airaid Premium Filter
1
#2 KIT919T
Modular Intake Tube
1
#3 KITHUMPS02
Urethane Hump Hose
1
#4 KITCOUPLER10
Urethane Coupler
1
KIT919HP Hardware & Instructions
1
#5 KITHS60 #60
Hose
Clamp
2
#6 KITHS64 #64
Hose
Clamp
2
* Filter included only in 200-719 kit
Tools Required For Installation:
5/16” Socket
Ratchet & Extension
Flat Screwdriver
#25 Torx Bit
1. Disconnect negative battery cable.
With a 5/16” socket, remove one bolt on the top of the
beauty cover. Set the bolt and the cover aside for re-
installation later.
2. Loosen the hose clamps on both ends of the factory in-
take tube.
3. With a screwdriver, pry the factory tube away from the
plastic tab on the radiator hose clamp, and remove the tube.
4. Install the hump hose (#3) and two #60 hose clamps (#5)
on the Mass Air Flow sensor as shown. Leave the clamps
loose for now.