Airaid 860-425 - Manual (Page 2)

7. Re insert the modified air scoop into the air box and secure
it using the # 8 Screws, Washers, and Nuts.
5. Set the factory air scoop on a workbench and mark
all four corners at the three inch mark using a scratch
awl. Using a straight edge and the awl, scribe a line
connecting all four corners.
6. Firmly place the air scoop into a bench vice and cut
along the line created in step 3 using a hack saw or
equivalent.
O-ring
8. Install the Airaid Premium filter into the airbox and re
assemble the intake system in the reverse order in which they
were removed.
Rev:10.24.13
3”
Synthamax Air Filters do not require oil. Service air
filter as needed by cleaning with common non-
petroleum all-purpose household cleaner and water.
Simple Green®, Formula 409® or equivalent works
great. Apply cleaner to outside of air filter and allow to
soak. Then flush filter clean from the inside out with a
garden hose and repeat steps if necessary. Do not apply
high pressure water or air to clean filter. Allow filter to
air dry and reinstall
.
For your Oiled media filter we suggest using
the AIRAID Filter Tune-Up Kit!