Airaid 520-538 - Manual (Page 2)

Instructions Revision
02.13.15
Contact your nearest Airaid dealer for an Airaid Intake
System for your car, truck or SUV.
The sound of power...The “whistle” means its working!
3. Install the O-Ring (#2) into the groove on the
Poweraid Spacer (#1). Install the spacer between the
intake manifold, and the throttle body with the O-
Ring facing the throttle body. Insert four 6mm x
70mm Hex Bolts (#3), and 6mm Flat Washers (#4)
through the throttle body, Poweraid Spacer, and into
the intake manifold. Using a 10mm socket, tighten
all 4 throttle body bolts evenly, to the manufactur-
er’s specifications.
Do Not Over Tighten The Bolts! 4. Reinstall the factory intake tube, and tighten the
hose clamp. Reinstall the engine beauty cover, and
tighten the factory bolts.
Re-connect the negative battery cable!
Spacer
O-Ring
Throttle
Body