Airaid 450-603 - Manual (Page 2)

5. Reinstall the intake tube, and any other parts that were
removed to gain access to the throttle body in the reverse
order in which they were removed.
Double check your work. Make sure there is no foreign
material in the intake tract. Make sure all clamps, con-
nectors, hoses, nuts, and bolts are secure.
3. Pull the throttle body away from the intake manifold
and Install the PowerAid and the supplied gasket. The
logo is to be facing the throttle body and in the 12:00
o’clock position. the supplied gasket is to be on throttle
body side. Align the bolt holes, and install the supplied
bolts and washers. Tighten the bolts to the factory specifi-
cations in an “X” pattern. Before starting the engine,
manually cycle the throttle plate to make sure there are no
obstructions.
4. Slide the throttle body inlet tube back onto the throttle
body and tighten the clamp.
Contact your nearest Airaid dealer for an Airaid Intake System for
your car, truck or SUV.
Rev:03.24.14
Gasket
The sound of power...The
“whistle” means its working!