AEC OFE Blender - Manual (Page 18)

OFE Series Weight Loss Feeders Page 17
Be sure that all non-current carrying parts of electrical apparatus,
electrical component enclosures, and the feeder frame are correctly
connected to earth ground with an electrical conductor that
complies with current codes. Install in accordance with national
and local codes, which apply.
When you have completed the repair or maintenance procedure,
check your work, remove your tools, rigging, and handling
equipment.
Do not restore power to the feeder until all persons are clear of the
area. DO NOT start and run the feeder until you are sure all parts
are functioning correctly.
BEFORE you turn the feeder over to the operator for production,
verify all system enclosure panels, guards and safety devices are in
place and functioning properly.
2-8 Safety
2-8-1 Description and Objectives
This section includes information on safety devices and procedures that are
inherent to the OFE Series Feeder. This manual is not intended to supersede or
alter safety standards established by the user of this equipment. Instead, the
material contained in this section is recommended to supplement these
procedures in order to provide a safer working environment.
At the completion of this section, the operator and maintenance personnel will
be able to:
• Identify and locate specific safety devices.
• Understand the proper use of the safety devices provided.
• Describe the function of the safety devices.
2-8-2 Safety Circuit Standards
Safety circuits used in industrial systems protect the operator and maintenance
personnel from dangerous energy. They also provide a means of locking out or
isolating the energy for servicing equipment.
Various agencies have contributed to the establishment of safety standards that
apply to the design and the manufacture of automated equipment. The
Occupational Safety and Health Administration (OSHA) and the Joint