ACTi E924~E929 - Manual (Page 25)

www.acti.com
Hardware Manual
25
Other Adjustments and Accessories
How to Install / Remove the Memory Card
How to Insert the Memory Card
1. Loosen the three (3) screws to remove the dome cover.
2. Insert the memory card into the card slot with the metal contacts facing the bottom side of the
camera.
3. Push the card completely until it clicks into place.
4. Attach the dome cover to the camera and tighten the three (3) screws.
Once inserted, make sure to access the camera Web Configurator and “mount” the card to
prepare the card for local recording. Refer to the camera Firmware User’s Manual for more
information.
How to Remove the Memory Card
In case there is a need to remove the card, make sure to access the camera Web Configurator to
safely “unmount” the card first (see the camera Firmware User’s Manual for more information).
Once unmounted from the firmware, push the card to eject it from the slot.