Step 4: install the camera – ACTi E924~E929 User Manual
Page 18

Hardware Manual
Step 4: Install the Camera
1.
If necessary, insert a memory card into the memory card slot of the camera. See
on page 25 for more information.
2.
Install the camera to the surface using the three (3) bundled screws.
NOTE:
Please make sure the screw is flat on the plate.
The photographed model in this section is for demonstration only. The
instruction applies to all models listed in this manual.
This manual is related to the following products:
- E924M~E929M E918 E918M E919 E919M E920 E920M E921 E921M E922 E922M E923 E923M Outdoor Mini Dome and Mini Fisheye Dome on Hard Ceiling Outdoor Mini Dome and Outdoor Mini Fisheye Dome on Dropped Ceiling Outdoor Mini Dome and Mini Fisheye Dome on Straight Wall Outdoor Mini Dome and Mini Fisheye Dome on Tilted Wall 2MP Outdoor Mini Dome Camera with 2.55mm Fixed Lens and RJ-45 Connector