beautypg.com

Step 8: close the dome cover – ACTi E924~E929 User Manual

Page 24

background image

www.acti.com

Hardware Manual

24

Step 8: Close the Dome Cover

1.

Align the cable hole side of the dome cover to the direction of the network cable.

2.

Tighten the three (3) screws using the supplied hex screwdriver to attach the dome cover.

3.

Remove the thin film.

Final installation should look similar to the illustration below.

NOTE:

The photographed model in this section is for demonstration only. The instruction

applies to all models listed in this manual.