ACTi E924~E929 - Manual (Page 14)

www.acti.com
Hardware Manual
14
Mounting Options
Select the most suitable solution for your installation environment. The camera can be mounted
by either of the following methods:
Mount Types Accessories
Surface Mount Suitable when mounting the camera directly on walls or ceilings without
additional mounting accessories. See Installation Procedures on page
15 for more information.
Gangbox Suitable when mounting the camera on a 4” Round or 4” Octagon
Gangbox. The use of gangbox is lawfully required in some areas in the
United States. A Gangbox Converter (purchased separately) is required
for this type of installation.
Wall Mount Suitable when mounting the camera on the wall with the camera facing
down as if installed on the ceiling. The Wall Mount (optional mounting
accessory) is required for this type of installation.
Pendant Mount Suitable when installing the camera on high ceilings where a straight
tube is used to lower the camera. The Pendant Mount with Mount Kit
(optional accessory set) is required for this type of installation.
NOTE:

For more information about the mounting solutions and accessories, please check the
Mounting Accessory Selector in our website ( http://www.acti.com/mountingselector ).

The above mounting accessories are not included in the package. Contact your sales
agents to purchase.