ACTi E924~E929 - Manual (Page 13)

www.acti.com
Hardware Manual
13
Item Description
1 Memory
Card Slot
Insert a memory card (not included) into the slot for local recording
purposes. See How to Install / Remove the Memory Card on page 25
for more information.
NOTE: Supports only microSDHC and microSDXC cards.
2 Power LED Lights up when the camera is powered up and goes off after the boot up
process is complete
3 Reset
Button
Restores the factory default settings of the camera. To reset the camera,
while the power is on, press and hold the Reset Button for at least 5
seconds or until the Power LED lights up.
4 Ethernet
Port (M12)
Connects to a network using an Ethernet cable with M12 connector. The
camera uses the female M12 connector with D-coding and PoE type A.
5 Audio Input Connects to audio input devices, such as a microphone with built-in
amplifier, etc. See How to Connect Audio In Device on page 29 for more
information.
NOTE: The microphone must have a built-in amplifier. Connecting an
ordinary microphone will dwarf sounds and will result in inaudible
recording.