Westermo TD-34 - Manual (Page 36)

36 6610-2203
*WDB – Dialback
This command set and display the dialback parameters and data.
When the dialback function is configured and enabled the 2-wired leased line will have a PSTN
backup line. If the leased line connection is lost, the modem will try (number of retries) to
reconnect before it will try to connect (to the number specified) on the PSTN line. If the
reconnect time is set and the backup line is used, the modem will close the PSTN connection
after the specified number of minutes and then try to connect on the 2-wired leased line.
Syntax: AT*WDB=,,
AT*WDB=?
AT*WDB?
Dialback number string (max 16 chars)
< retries > Number of connect fails (0-9, 3 Default)
< time >
Time before reconnect (0-255, 0 Default = OFF)
Examples: AT*WDB =12345,3,1
OK
AT*WDB ?
*WDB: NUMBER=12345, RETRIES=3, TIME=1
OK
AT*WDB =?
*WDB: (0-16 CHAR),(0-9),(0-255)
OK
Result Codes: OK ,,=(0-16 Characters),(0-9).(0-255)
ERROR Otherwise