Westermo TD-34 - Manual (Page 35)

35 6610-2203
*WCID – Caller ID / A-Number
This command set and display Caller ID parameters and data.
In Caller ID mode 3 and 4 the modem will wait for incoming call and then display the incom-
ing number as a format or unformat string. In Caller ID mode 5 the modem will wait for
incoming call and if the number match the A-Number stored in the modem, the modem will
answer the call.
Syntax: AT*WCID
AT*WCID=,
AT*WCID=?
AT*WCID?
=
0 Disabled
= 1 CID format after ring signal (not supported)
= 2 CID unformat after ring signal (not supported)
= 3 CID format before ring signal
= 4 CID unformat before ring signal
= 5 A-Number to answer
A-Number (16 char)
Examples: AT*WCID=1
OK
AT*WCID
(After RING)
CALLER ID : 12345
OK
AT*WCID=5,12345 (Modem will answer if incoming number is 12345)
OK
AT*WCID=?
*WCID : MODE=5, ANUM=12345
OK
AT*WCID=?
*WCID: (0-5),(0-16 CHAR)
OK
Result Codes: OK ,=(0-5),(0-16 Characters)
ERROR Otherwise