Westermo TD-34 - Manual (Page 26)

26 6610-2203
+ICF – Fixed DTE format
This command specifies the data format between the DTE and the modem.
Syntax: AT+ICF=
AT+ICF=?
AT+ICF?
Format (0-5,8-13)
Format: Auto 7N2 7E1 7O1 8N1 8E1 8O1 7E2 7O2 8N2 8E2 8O2
Value: 0 4,4 5,1 5,0 3,4 2,1 2,0 4,1 4,2 1,4 1,1 1,2
Examples: AT+ICF=3
OK
AT+ ICF?
+ ICF : (3,4)
OK
AT+ ICF =?
+ ICF : (0-5),(8-13)
OK
Result Codes: OK = (0-5),(8-13)
ERROR Otherwise
+IPR – Fixed DTE baud rate
This command specifies the data rate between the DTE and the modem.
Syntax: AT+IPR=
AT+IPR=?
AT+IPR?
Baud rate (300–230400)
Baud: 300, 600, 1200, 2400, 4800, 7200, 9600, 14400, 19200, 28800, 38400,
57600, 115200, 230400
0 (will give auto selection)
Examples: AT+IPR=9600
OK
AT+IPR?
+IPR : 9600
OK
AT+IPR=?
+IPR : (0, 300, 600, 1200, 2400, 4800, 7200, 9600, 19200, 28800, 38400,
57600, 115200, 230400)
OK
Result Codes: OK = (0, 300–230400)
ERROR Otherwise