Watson-Marlow MC12 - Manual (Page 24)

Operators and Reference Manual
MC12
MC12 OM RM 1.03_EN Version: 1.03 Date: 2010-11-17 Page 24 of 46
6.7.28. Function 34 - Print programs
This function prints the individual parameters in all the programs stored in the memory.
When pressing <3>+<4>+ the system will ask: “PRINT PROGRAMS /Y/N):”
When pressing the system will leave the function, without carrying out the function. When
pressing the system will start printing the parameters in all programs saved.
6.7.29. Function 35 - Free memory capacity
This function shows how many used and free programs are left in the memory.
When pressing <3>+<5>+ the system will show how many programs are saved as well as
the free memory capacity, e.g.: “FREE: 98 USED: 2”
FREE indicates the number of programs (complete sets of operating parameters) which can still
be saved.
USED indicates the number of programs (complete sets of operating parameters) saved.