Watson-Marlow 624Di - Manual (Page 32)

Watson-Marlow Bredel E-Manuals
http://www.watson-marlow.it/pdfs-global/m-624Di-gb-01.htm[10/07/2012 13:59:15]
taken as a guide. Real flow rates in any application must be determined empirically.
620R
Flow rates: Marprene, Bioprene
mm 6.4 9.6 12.7 15.9
inch 1/4 3/8 1/2 5/8
# 26 73 82 184
4-200 (l/min) 0.05 - 2.6 0.10 - 5.0 0.16 - 8.0 0.21 - 10
4-200 (USGPM) 0.01 - 0.7 0.03 - 1.3 0.04 - 2.1 0.06 - 2.6
Flow rates: Silicone
mm 6.4 9.6 12.7 15.9
inch 1/4 3/8 1/2 5/8
# 26 73 82 184
4-200 (l/min) 0.05 - 2.4 0.11 - 5.4 0.17 - 8.4 0.22 - 14
4-200 (USGPM) 0.01 - 0.6 0.03 - 1.4 0.04 - 2.2 0.06 - 3.6
Flow rates: Neoprene, STA-PURE
mm 6.4 9.6 12.7 15.9
inch 1/4 3/8 1/2 5/8
# 26 73 82 184
4-200 (l/min) 0.05 - 2.4 0.10 - 5.0 0.16 - 8.0 0.24 - 12
4-200 (USGPM) 0.01 - 0.6 0.03 - 1.3 0.04 - 2.1 0.06 - 3.2
620RE
Flow rates: Marprene TM, Bioprene TM
mm 12 17
LoadSure LoadSure
4-200 (l/min) 0.15 - 7.4 0.24 - 12
4-200 (USGPM) 0.04 - 2.0 0.06 - 3.1
Flow rates: Marprene TL, Bioprene TL
mm 12 17
LoadSure LoadSure
4-200 (l/min) 0.15 - 7.4 0.27 - 13
4-200 (USGPM) 0.04 - 2.0 0.07 - 3.6
Flow rates: Silicone
mm 12 17
LoadSure LoadSure
4-200 (l/min) 0.15 - 7.7 0.24 - 12
4-200 (USGPM) 0.04 - 2.0 0.06 - 3.2
Flow rates: Neoprene, STA-PURE