Watson-Marlow 624Di - Manual (Page 21)

Watson-Marlow Bredel E-Manuals
http://www.watson-marlow.it/pdfs-global/m-624Di-gb-01.htm[10/07/2012 13:59:15]
625L Care and maintenance
Check all moving parts for freedom of movement occasionally. If aggressive fluids are spilt
onto the pumphead, clean using a mild detergent only.
625L Track adjustment
The track is set for 4.0mm wall tubing up to 16.0mm bore. Alteration of this setting using
the pan head screws may be necessary to optimise performance if non-standard tubing is
used. The factory setting is 20.3mm vertically from the rotor side of the sprung track to
the top of the track cover.
625L Pumphead spares
Number Spare Description
1 MRA0141A Track assembly
2 MR0851S Cover plate
3 SW0050 Proximity switch
4 MRA0143A Adaptor
5 BB0018 Shaft bearing