Watson-Marlow 624Di - Manual (Page 25)

Watson-Marlow Bredel E-Manuals
http://www.watson-marlow.it/pdfs-global/m-624Di-gb-01.htm[10/07/2012 13:59:15]
Calibration
D1. Indication of previous calibration (if completed).
E1. Decision to calibrate pump to new pumphead and tubing size.
F1. Select the pumphead and tubing which is fitted to pump.
G1. Confirmation of user selections. Maximum pump speed is governed by pumphead
fitted.
H1. Decision to calibrate pump using a calibration dose.
I1. Enter calibration speed and direction.
J1. Pump starts to calibrate. Press stop when ready.
K1. After 15 seconds pump will prompt user to stop calibrating.
L1. Measure and then enter the actual volume that has been dosed during calibration.
M1. Indication of pumphead, ml/rev and maximum rpm which is governed by the
pumphead.
Calibration