Watson-Marlow 624Di - Manual (Page 22)

Watson-Marlow Bredel E-Manuals
http://www.watson-marlow.it/pdfs-global/m-624Di-gb-01.htm[10/07/2012 13:59:15]
6 MRA0150A Rotor assembly
7 MR0850S Front plate
8 MRA0144A Tuibe locating peg
069.4001.000 Tube clamp set
625L Operation
User
decision
Pump screen
display
Terminal Operation Flow
connector
Manual
input
Instruction
reference
Keypad functions
Quick start
A. Switch on power to drive.
B. User decision to calibrate.
C. Indication of head and tubing to which pump is currently calibrated.
D. If set-up not correct change existing set-up.
E. Select head and tubing.
F. Choose the pumphead required.
G. Choose the tube size. Selection confirmed.
H. Select Dose from Main menu.
I. Set a new dose program.
J. Set the volume or weight to be dosed.
K. Set the time interval between doses.
L. Set the number of doses to be dispensed.
M. Set the pump speed or volume flow rate.
N. Proceed to dose with using set parameters.
O. Verification of interval between doses and pump speed.
P. Verification of volume and number of doses, press Start.
Quick start