Watson-Marlow 624Di - Manual (Page 18)

Watson-Marlow Bredel E-Manuals
http://www.watson-marlow.it/pdfs-global/m-624Di-gb-01.htm[10/07/2012 13:59:15]
Ensure a 20 minute acclimatisation period is observed before running the pump
following SIP.
Ensure that controlled waste pipework is fitted to allow a safe release of steam in
the event of a tube failure..
Ensure a 1m safety zone is maintained around the pumphead during SIP cycles.
Ensure that the pumphead door is closed and locked before SIP
cleaning commences.
620RE, 620RE4 and 620R Pumphead spares
Number Spare Description
1 Tube clamp pack: p/n 069.4101.000
2 MR2052C Oddie fastener
2 MR2053B Clip: Oddie retainer
2 MR2054T Oddie washer
2 SG0021 Oddie spring
2 CX0150 Oddie circlip (snap ring)
3 MRA0251A Track assembly (continuous pumphead) - includes guard
3 MRA0297A Track assembly (element pumphead) - includes guard