HP Spectre x2 - Manual (Page 49)

Kickstand retention assembly
Description Spare part number
Kickstand retention assembly (includes left and right assemblies) 830339-001
Before removing the kickstand retention assembly, follow these steps:
1. Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then
shut it down through the operating system.
2. Disconnect the power from the slate by unplugging the power cord from the slate.
3. Disconnect all external devices from the slate.
4. Remove the display panel assembly (see Display panel assembly on page 20 ).
5. Remove the speakers (see Speakers on page 29 ).
Remove the kickstand retention assembly:
1. Remove the four Phillips PM2.0×4.5 screws (1) that secure the kickstand retention assemblies to
the back cover.
2. Remove the kickstand retention assemblies (2).
Reverse this procedure to install the kickstand retention assemblies.
Component replacement procedures 39