HP Spectre x2 - Manual (Page 33)

12. Remove the display panel assembly (4).
Reverse this procedure to install the display panel assembly.
Battery
Description Spare part number
3-cell, 42-Wh, 3.69-Ah, Li-ion battery (includes cable) 814060-850
Before removing the battery, follow these steps:
1. Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then
shut it down through the operating system.
2. Disconnect the power from the slate by unplugging the power cord from the slate.
3. Disconnect all external devices from the slate.
4. Remove the display panel assembly (see Display panel assembly on page 20 ).
Remove the battery:
1. Remove the six Phillips M2.0×3.5 screws (1) that secure the battery to the back cover.
Component replacement procedures 23