Vinpower Digital Titan Lightscribe Autoloader - Manual (Page 8)

6
2. The Robotic Platform
100 Disc Capacity Model – 3 Writers
This autoloader model has two spindles (see Figure 1-3). Each spindle holds approximately 100 discs
(actual quantity varies depending on the media’s thickness). Spindle 2 is the input spindle. Spindle 1 is the
output spindle. Stack the blank discs you wish to copy and/or print on Spindle 2 (see figure 1-2 on page 5
for proper media stacking). The robotic arm will pick blank discs from Spindle 2 then place the successfully
copied/printed discs onto spindle 1. Reject discs will be placed on the deck below the drive trays (default
location) or in the storage bin on top of the Robotic Control Tower. (Throughout this manual, this area is
also referred to as the “Reject Area”).
Figure 1- 3 Robotic Duplicator (100 Capacity) Top View