Vinpower Digital Titan Lightscribe Autoloader - Manual (Page 38)

36
Setup
3.CD Writing Mode
CD Writing Mode
Disc at Once
CD Writing Mode
Track at Once
Setup
4.Max Audio, VCD & CDG Speed
Max Audio, VCD & CDG Speed
16x
Setup
5.Buzzer
Buzzer:
On
Buzzer:
Off
Setup
6.Startup Menu
Startup Menu
Copy
13.3 CD Writing Mode
This setting allows you to select which mode to use to duplicate a CD; “Disc at Once” or “Track at Once”.
Unless you understand completely what these modes are, we strongly suggest you set it to “Disc at Once.”
Use the Up or Down button to select the CD Writing Mode menu and
press the ENT/Enter button to enter that menu.
Use the Up or Down button to select either Disc at Once or Track at
Once, and press the ENT/Enter button to select that option.
13.4 Max Audio, VCD & CDG Speed
Due to the lack of error checking mechanism for Audio CD, Video CD and CD+G format, duplicating them at
too high a speed can cause frequent errors like glitches and skips. Use this setting to adjust the maximum
duplication speed for Audio, Video CD and CD+G format to ensure reliable duplication for such formats.
Use the Up or Down button to select the Max Audio, VCD
& CDG Speed menu and press the ENT/Enter button to enter
that menu.
Use the Up or Down button to select the desired maximum
writing speed for Audio, VCD and CDG, and press the
ENT/Enter button to select that option.
Note: The actual speed that is selected may be determined by the drives or by the blank media.
13.5 Buzzer
This setting will allow you to choose whether you want to hear a beep when you press a button or when a
task has been completed.
Use the Up or Down button to select the Buzzer menu and press the
ENT/Enter button to enter that menu.
Use the Up or Down button to select whether Buzzer is on or off, and
press the ENT/Enter button to select that option.
13.6 Startup Menu
This setting will allow you to choose the menu option that you will see first when you turn on the autoloader.
Use the Up or Down button to select the Startup Menu option and
press the ENT/Enter button to enter that menu.
Use the Up or Down button to select the desired startup menu, and
press the ENT/Enter button to select that option.