Vinpower Digital Titan Lightscribe Autoloader - Manual (Page 57)

55
R255 High static shock error
Too much static electricity built up from the disc(s). This error occurs
when the static electricity on the disc is too high. Either the facility
produces too much static electricity or the current climate is
conducive to high concentration of static electricity. This error is
caused by the buildup of an electric static charge which shocks the
robotic arm while loading a disc. If this error should occur, the user
must completely reboot the system by turning the unit off at the power
button. When the unit is turned on again, it should operate normally,
but you will need to reprogram the job it was running.