Vinpower Digital Titan Lightscribe Autoloader - Manual (Page 47)

45
Duplicator 3.37
16.Manage Accounts
Enter PWD
[ ] OK?
Manage Accounts
1.View User
Manage Accounts
1.View User
drives. Then you can press the ENT/Enter button to update. You should not upgrade your autoloader's
robot firmware unless your system is becoming unstable or you are advised to do so by Tech Support.
16. Manage Accounts
This feature allows the administrator to:
 Create user accounts and passwords to prevent unauthorized use of this autoloader.
 Edit existing user account information, including name and password.
 Delete existing user account(s).
 Enable or disable “Manage Accounts”
Manage Accounts is disabled by default. Prior to activating the “Manage Accounts” feature, the autoloader
recognizes all users as the Administrator. The pre-defined password for this function is “0000.” By adding
additional users, each individual user has their own settings.
To take advantage of this feature, follow these instructions:
 Change the Administrator password. Refer to “Edit User Info” on page 46 for additional information.
 Create a User Name and Password for each authorized person on this autoloader. Refer to “Create
User” on page 46 for additional information.
 Enable the “Manage Accounts” feature by turning on the “Password on Bootup” setting. Refer to
“Password on Bootup” on page 47 for additional information.
Note: This system comes with a standard license that allows you to create up to 32 users.
However, if you desire to create more than 32 users, please contact Tech Support Service
regarding our special 64 user license pack.
To access the Manage Accounts feature, you need to perform the following tasks:
Use the Up or Down button to select the Manage Accounts menu
and press the ENT/Enter button to enter that menu. You will be shown
the Enter Password menu.
The system will ask you for the Administrator's Password.
The default Administrator's Password is “0000.” To enter, press the Up or Down button to select the
first digit of your password and press the ENT/Enter button to submit the current digit. You will automatically
move to the next digit. Repeat these steps until you've selected all four digits for your password. After you
have entered the password, press the ENT/Enter button to “OK” the submission of your password.
Once your password is validated, you will be guided to the main Manage Accounts screen:
The submenus of Manage Accounts are discussed in the sections that follow.
16.1 View User
This menu allows you to view current existing user accounts.
Note: User “Admin” is the administrative account. It will always be there.
Press the ENT/Enter button to enter this menu