Vinpower Digital Titan Lightscribe Autoloader - Manual (Page 24)

22
Duplicator 3.37
1.Copy (MM)
Preparing...
Please Wait
OK: 0 NG: 0 NB: 0
Input Bin > Drive01
Duplicator 3.37
1.Copy (MM)
Duplicator 3.37
8.Master Mode
Master Mode:
Single Master
Master Mode:
Multi Master
Duplicator 3.37
1.Copy (MM)
1.2.1 Select Multi Master Mode
Make sure the Master Mode is set to Single Master Mode (SM). If it is
already in Single Master Mode (SM), please skip to step 1.1.2 that starts the
copy process. If it is not, use the
Up or Down button to navigate to the
Master Mod .screen.
Press the ENT/Enter button to enter the Master Mode Menu and you will
see a screen similar to one of the following:
Use the
Up or Down button to select Multi Master Mode. Press the
ENT/Enter button to submit your selection.
Use the
Up or Down button to navigate back to the Copy Menu.
1.2.2 Start the Copying Process
Place your master discs and blank discs onto the Input Spindle as described in “Single Master and Multi
Master Modes” on page 16. In general, the order of the discs on the spindle will be, from top to bottom:
 The master disc for the first job
 The blank discs for the first job
 The master disc for the second job
 The blank discs for the second job
 The master disc for the third job
 The blank discs for the third job
 etc.
If your autoloader has more than one Input Spindle, then the job sequence can be spread across the
spindles, in sequence. Duplication Jobs with different formats among CD/DVD/BD can be intermixed. The
autoloader will automatically detect a job’s master and blank disc format and copy them when they match.
You should still be at the Copy Menu:
Press the ENT/Enter button to start the duplication job.
After a short interval, the robotic loader will pick the top disc (master disc)
from the Input Spindle and place it into one of the drives. As this is
happening, you will see a screen similar to below:
This information screen shows what is happening. In this case, the loader
has taken a disc from the Input Spindle and is placing it into Drive 1.