Verilink TAC 2130 S/T (880-503296-001) Product Manual - Manual (Page 18)

Quick Set-Up
2-2 Verilink TAC 2130 User Manual
Connect to Craft
Port
Connect the modular (RJ-11) end of the Craft cable to the port
labeled
CRAFT on the front panel of the node controller module. The
node controller module is usually installed in slot 1 of shelf 1.
Connect the other end of the Craft cable to your PC or terminal.
Set your terminal, or terminal program, to 19.2 kbit/s, 8 data bits,
no parity, one stop bit, and no flow control.
Log In 1. Press E NTER .
2. The prompt YOUR PASSWORD? YOUR PASSWORD? YOUR PASSWORD? YOUR PASSWORD? is displayed.
3. Initially there is no password, press E NTER .
4. The Main Menu for the node controller module is displayed.
See Figure 2-2 .
Figure 2-2 NCC 2020 Main Menu
Select the IDCSU To configure the TAC 2130-T IDCSU you must first select it. The
Shelf/Slot command is used to select a module.
Type “S” and press E NTER .
The prompt for selecting a module appears. Type “1,10”.
The prompt line reflects the slot selection:
[1,10] NEAR IDCSU 2130 (UPDATE)> [1,10] NEAR IDCSU 2130 (UPDATE)> [1,10] NEAR IDCSU 2130 (UPDATE)> [1,10] NEAR IDCSU 2130 (UPDATE)>
-- VERILINK NCC NODE CONTROLLER at[1,1]: FW Rev 4.75 -- -- VERILINK NCC NODE CONTROLLER at[1,1]: FW Rev 4.75 -- -- VERILINK NCC NODE CONTROLLER at[1,1]: FW Rev 4.75 -- -- VERILINK NCC NODE CONTROLLER at[1,1]: FW Rev 4.75 --
SITE NAME: Tech Pubs TAC 2130-T
SITE NAME: Tech Pubs TAC 2130-T SITE NAME: Tech Pubs TAC 2130-T SITE NAME: Tech Pubs TAC 2130-T
NODE ID: 408
NODE ID: 408 NODE ID: 408 NODE ID: 408
<- SLOT ->
<- SLOT -> <- SLOT -> <- SLOT ->
SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13
SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13 SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13 SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13
1 M [C] D C D C D C D D I
1 M [C] D C D C D C D D I 1 M [C] D C D C D C D D I 1 M [C] D C D C D C D D I
2
2 2 2
3
3 3 3
4
4 4 4
KEY: C=CSU, D=DIU, F=DIU/DDS, B=DIU/DBU, R = SRD, I=IDCSU, T=TU, S=SMDS, V=VCU
KEY: C=CSU, D=DIU, F=DIU/DDS, B=DIU/DBU, R = SRD, I=IDCSU, T=TU, S=SMDS, V=VCU KEY: C=CSU, D=DIU, F=DIU/DDS, B=DIU/DBU, R = SRD, I=IDCSU, T=TU, S=SMDS, V=VCU KEY: C=CSU, D=DIU, F=DIU/DDS, B=DIU/DBU, R = SRD, I=IDCSU, T=TU, S=SMDS, V=VCU
S) shelf/slot D) diagnostics S) shelf/slot D) diagnostics S) shelf/slot D) diagnostics S) shelf/slot D) diagnostics
N) near element O) node administration
N) near element O) node administration N) near element O) node administration N) near element O) node administration
F) far element M) monitor alarms (OFF)
F) far element M) monitor alarms (OFF) F) far element M) monitor alarms (OFF) F) far element M) monitor alarms (OFF)
C) configuration A) alm to net mgr (OFF)
C) configuration A) alm to net mgr (OFF) C) configuration A) alm to net mgr (OFF) C) configuration A) alm to net mgr (OFF)
P) performance X) log off
P) performance X) log off P) performance X) log off P) performance X) log off
[1,1] NEAR TAC 2010 > [1,1] NEAR TAC 2010 > [1,1] NEAR TAC 2010 > [1,1] NEAR TAC 2010 >