Rear connector modules for tac 2130-t, Rear connector modules for tac 2130-t -6, Adapter cables – Verilink TAC 2130 S/T (880-503296-001) Product Manual User Manual

Page 14

Overview

1-6

Verilink TAC 2130 User Manual

Adapter Cables

Rear connector modules for the TAC 2130 and TAC 2130-S have a
mini D-Sub 26 pin connector for the data port. A short adapter
cable is also provided. The adapter cable, sometimes called a
pigtail cable, presents the typical connector for the specific
electrical interface. See

Table 1-3

for a cross reference of the

adapter cables.

Table 1-3

Adapter Cables Used With TAC 2130 and TAC 2130-S

Rear Connector

Modules for TAC

2130-T

Figure 1-8

and

Figure 1-9

illustrate the rear connector modules

used only with a TAC 2130-T front module. Since these connector
modules have Winchester 34-pin V.35 connectors, adapter cables
are not required for data port connections.

TAC 2130-T front modules are used exclusively with CDM 2035-T
or CDM 2135-T type rear modules. These rear modules can only be
used with a TAC 2130-T.

Figure 1-8 CDM 2035-T Back Panel

Figure 1-9 CDM 2135-T Back Panel

Cable P/N

Electrical

Interface

Used With CDM Types

Connectors

458-501594-001

ITU V.35

CDM 2035, CDM 2135

Mini D-Sub 26 - Winchester 34-pin

458-502059-001

RS-449

(RS-422)

CDM 2049; CDM 2149

Mini D-Sub 26 - DB-37

458-502045-001

EIA 530

CDM 2049; CDM 2149

Mini D-Sub 26 - DB-25

NETWORK

NO COM NC

V.35 DATAPORT 1

CDM

203

ALARM
RELAY

311-10X

-001

Female Data

Winchester 34-pin

Connector

Alarm Relay

EXT TIMING

8-pin DIN

(not used)

RJ48-C
Network

EV *