Verilink TAC 2130 S/T (880-503296-001) Product Manual - Manual (Page 12)

Overview
1-4 Verilink TAC 2130 User Manual
Figure 1-2 TAC 2130-S Front Panel
Figure 1-3 TAC 2130-T Front Panel
Rear Connector
Modules
The IDCSU is installed with a rear connector module that provides
ports for various interface requirements.
Table 1-2 lists the
connector modules that can be paired with the TAC 2130, TAC
2130-S, and TAC 2130-T front modules.
NOTE: The TAC 2130-T front module is used only with a CDM 2035-
T or CDM 2135-T rear connector module. Front and rear
modules ending with “-T” are exclusively used together.
Table 1-2 IDCSU Rear Connector Modules
NE
T
ST
A
T
EQ
PT
Equipment, CSU
Status, an
Network LEDs
2130-S
TAC
NE
T
ST
A
T
EQ
P
T
Equipment, CSU
Status, an
Network LEDs
2130-T
TAC
Front
Module
Rear
Connector
Module
Data Port Connector /
Electrical Interface
T1 Network
Port
Connector
Management
Port In
Management
Port Out
TAC 2130 or
TAC 2130-S
CDM 2035 Mini D-Sub 26 : V.35 RJ-48C not used not used
CDM 2049 Mini D-Sub 26 : RS-449/EIA 530 RJ-48C not used not used
CDM 2135 Mini D-Sub 26 : V.35 DB-15 not used not used
CDM 2149 Mini D-Sub 26 : RS-449/EIA 530 DB-15 not used not used
TAC 2130-T CDM 2035-T Winchester 34-pin : V.35 RJ-48C none none
CDM 2135-T Winchester 34-pin : V.35 DB-15 none none