Verilink PRISM 3030 (34-00208.L) Product Manual - Manual (Page 88)

78 A PPENDIX A: P INOUTS AND I NTERFACE S PECIFICATIONS
Note 1: Only circuits serviced by the unit are listed.
Note 2: When two pins are listed, the first is the A differential pin and the second
is the B differential pin.
The connector is a standard 34 -pin female V. 35.
All balanced bipolar inputs and outputs meet the physical and electrical
specifications at ITU V.35.
All unbalanced bipolar inputs and outputs meet the physical and electrical
specifications of ITU V.28.
Table A-2 V.35 Pin Assignments
Circuit
(See Note 1)
Pin #
(See Note 2) Signal Name Abbr. DCE I /O
101 A Protective Ground FG Ground
102 B Signal Ground SG Ground
103 P/S Transmit Data TD In
104 R/ T Receive Data RD Out
105 C Request To Send RTS In
106 D Clear To Send CTS Out
107 E Data Set Ready DSR Out
108/ 2 H Data Terminal Ready DTR In
109 F Data Carrier Detect DCD Out
113 U/ W External Transmit Clock ETC In
114 Y/AA Transmit Clock TC Out
115 V/ X Receive Clock RC Out