Verilink PRISM 3030 (34-00208.L) Product Manual - Manual (Page 17)

2
I
NSTALLATION
Introduction This chapter contains information and instructions required to prepare the Verilink
PRISM 3030 for use. Included are initial inspection procedures, mounting
instructions, configuration guidelines, connection, and powering information.
The unit is shipped ready for desktop or horizontal rack mount use. Mounting
brackets are attached at the front edge of the unit. These may be removed for
desktop use.
Safety Summary This manual contains information and warnings that must be followed by the user
to ensure safe operation and to retain the equipment in a safe condition.
This WARNING sign denotes a potential hazard to the operator. It calls attention to a
procedure or practice that, if not correctly performed or adhered to, could result in
injury or loss of life. Do not proceed beyond a WARNING sign until the indicated conditions
are fully understood and met.
CAUTION: Option modules are susceptible to damage caused by static electricity.
Use ESD (electrostatic device) precautionary measures, such as wearing static
grounding straps and storing modules in the supplied anti -static bags.
Unpacking and
Inspection This unit is carefully packaged to prevent damage in shipment. Upon receipt,
inspect the shipping container for damage. If the shipping container or cushioning
material is damaged, notify the carrier immediately and make a notation on the
delivery receipt that the container was damaged (if possible, obtain the signature
and name of the person making delivery). Retain the packaging material until the
contents of the shipment have been checked for completeness and the instrument
has been checked both mechanically and electrically.
If the contents of the shipment are incomplete or, if there is mechanical damage or
defect, notify Verilink. If the shipping container is also damaged, or the cushioning
material shows signs of stress, notify the carrier of the damage as well as Verilink.
Keep the shipping materials for the carrier’s inspection. Verilink will arrange for
repair or replacement without waiting for claim settlement.
Supplied
Materials The PRISM 3030 is shipped from the factory with the following standard
equipment:
✦ Attached 19-inch mounting brackets
✦ The PRISM 3030 reference manual
✦ AC power supply cord for AC-powered units