4-wire e&m, Dnis+ delay seconds, Fxo 4-wire e&m – Verilink PRISM 3030 (34-00208.L) Product Manual User Manual
Page 43
Voice Port Configuration
33
MEG/GS: MEGACOM/ Ground
Start
MEGR/LS:
MEGACOM/ Loop Start with Reverse Battery
MEGR/GS:
MEGACOM/ Ground Start with Reverse Battery
PLAR:
Private Line Automatic Ringdown
SLC 96:
SLC 96 Channel Signalling
DID/DNIS:
Direct Inward Dialing / Dialed Number Identification Service
[Dial Pulse Originate (DPO) mode]
DNISW/LS:
Loop Start DNIS (LS-DNIS) with wink
DNISD/LS:
LS-DNIS with delay start
DNISWR/LS:
LS-DNIS with wink and Reverse Battery
DNISDR/LS:
LS-DNIS with delay and Reverse Battery
DNISW/GS:
Ground Start DNIS (GS-DNIS) with wink
DNISD/GS:
GS-DNIS with delay start
DNISWR/GS:
GS-DNIS with wink and Reverse Battery
DNISDR/GS:
GS-DNIS with delay and Reverse Battery
FXO
FXO/LS:
Foreign Exchange Office/Loop Start
FXO/GS:
Foreign Exchange Office/Ground Start
FXO UVG:
Foreign Exchange Office/Universal Voice Grade
FXO UVGR:
Foreign Exchange Office/Universal Voice Grade
with Reverse Battery
DID/DNIS:
Direct Inward Dialing/Dialed Number Identification Service
[Dial Pulse Terminate (DPT) mode]
4 -Wire E&M
F-3010-200--112
F-3010-200--114
Type I: Signalling
Yes
Yes
Type II:
Signalling
Yes
Yes
Type III:
Signalling
Yes
Yes
Type IV:
Signalling
No
Yes
Type V:
Signalling
No
Yes
TO:
Transmission Only
Yes
Yes
DNIS+ Delay
Seconds
If signalling mode has a delay, it can be set from 1 to 5 seconds.