Verilink PRISM 3030 (34-00208.L) Product Manual - Manual (Page 13)

Specifications 3
Specifications
Network
Interface
Line Rate: 1.544 Mbps (
±
50 ppm)
Line Framing: D4 or ESF
Line Code: AMI or B8ZS
Input Signal: 0 to
−
27 dB ALBO
Connection: RJ-48C jack, 100
Ω
(
±
5%)
Output Signal: 3.0 V (
±
10%) base-peak into 100
Ω
with protection
Line Build Out: 0,
−
7.5,
−
15,
−
22.5 dB attenuation
Transient Voltage: 1000 V protection, fused input and output
Jitter Control: per TR 62411 and T1.403
Timing Source: Internal, recovered line clock, external DTE, station clock
Ones Density: B8ZS,
Ν×56
bit stuffing, alternate fill; complies with TR 62411
Equipment
Interface
T1 DTE Port (optional)
Line Rate: 1.544 Mbps (
±
50 ppm)
Line Framing: D4 or ESF
Line Code: AMI or B8ZS
Input Signal: DSX1 to
−
6 dB
Connection: RJ-48C jack, 100
Ω
(
±
5%)
Output Signal: Selectable DSX1 level from 0 to 655 feet in six incremental levels
DTE Slots 2 A through 3B
Compatibility: EIA-530 (RS-422), female DB-25; ITU V.35, female 34 -pin;
EIA-232, female DB-25
Data Rate: Synchronous,
Ν×56
kbps or N
×
64 kbps (where N = 1 to 24);
independent selection on each port
Clocking: Internal, External, or Oversample
Data Invert: Independent selection on each port
Voice application
modules (optional)
FXS
Applications: FXS (Foreign Exchange Station), In WATS,
Out WATS, Auto Ringdown, Universal Voice Grade (UVG;
Requires Verilink equipment at each end.), Direct Inward
Dialing (DID), Dialed Number Identification Service (DNIS),
Loop Start DNIS (LS-DNIS), Ground Start DNIS (GS-DNIS),
Automatic Number Identification (ANI), and Custom Local
Area Signalling Service (CLASS)
Connector: AMP 50-pin (25 pairs), female
Signalling: Loop, Ground, MEGACOM
®
, SLC
®
96