Verilink PRISM 3030 (34-00208.L) Product Manual - Manual (Page 27)

Network Management 17
LAN SNMP
Connection
The unit may be equipped with an optional Ethernet or Token Ring interface for
connection to the user’s LAN (local area network). The unit’s SNMP (Simple
Network Management Protocol) agent can then be programmed to take advantage
of the centralized status monitoring and alarm reporting capability of SNMP
managed networks. The LAN interface is connected to Slot 1 on the rear panel.
Ethernet
The Ethernet interface is compliant with the 802.3 standard and is presented on an
RJ-45 connector. The pinout is shown in Table 2-12.
O I O I
PRISM 3030 Rear Panel
NMS IN
may also
be used
RS-232 to Terminal
(PN 9-1001-028-1)
NMS IN
may also
be used
RS-232 to Modem
(PN 9-1001-027-1)
Modem
Terminal
Supervisory Port
Control Out
Data Out
Data In
Signal Gnd
Control In
Terminal (DTE)
TXD
RXD
RTS
CTS
Signal
GND
DB-25
1
2
3
4
5
6
1
2
3
4
5
6
7
20
21
22
23 PRISM 3030 Rear Panel
Supervisory Port
Control Out
Data Out
Data In
Signal Gnd
Control In
Modem (DCE)
TXD
RXD
RTS
CTS
Signal
GND
DB-25
1
2
3
4
5
6
1
2
3
4
5
6
7
20
21
22
23
Figure 2-5 Supervisory Port to Terminal and Supervisory Port to Modem Connections
Table 2-12 Ethernet Connector Pinout
Pin Ethernet Interface
1 Transmit Data +
2 Transmit Data
−
3 Receive Data +
6 Receive Data
−
4, 5, 7, 8 Spare