Verilink PRISM 3030 (34-00208.L) Product Manual - Manual (Page 61)

Alarms Screen 51
The Threshold column shows the values set in the Alarm Configuration screen
(Alarm Configuration Screen on page 64). Any parameter that has a value equal to
or greater than its non-zero threshold generates an alarm. Any parameter with a
threshold value of 0 is disabled from generating alarms.
The parameters shown on the Alarms Screen are updated at five-second intervals.
Power Loss
Seconds
Displays the number of seconds that the element has been without power since this
value was last cleared.
Reset Alarm
Registers
Pressing Enter on (RESET) zeros the value of all Current alarm parameters, but
does not affect 24 -hour or 30 -day performance registers.
✍