Verilink PRISM 3030 (34-00208.L) Product Manual - Manual (Page 126)

116 A PPENDIX C: M ANAGEMENT I NFORMATION B ASE (MIB) R EFERENCE
dsx1FracTable OID
{1.3.6.1.2.1.10.18.13}
Table C-10
Object Name Object ID User Access Object Description Get Set
dsx1FracIndex { dsx1FracEntry 1 } read-only “The index value which uniquely
identifies the DS1 interface to
which this entry is applicable. The
interface identified by a particular
value of this index is the same
interface as identified by the same
value an dsx1LineIndex object
instance.” (2) - Returns the
ifIndex of the DS1
interface.
dsx1FracNumber { dsx1FracEntry 2 } read-only “The channel number for this
entry.” Returns the
channel number (1
to 24).
dsx1FracIfIndex { dsx1FracEntry 3 } read-write “An index value that uniquely
identifies an interface. The
interface identified by a particular
value of this index is the same
interface as identified by the same
value an ifIndex object instance. If
no interface is currently using a
channel, the value should be zero.
If a single interface occupies more
than one time slot, that ifIndex
value will be found in multiple
time slots.” Returns the number
of the interface to
which the specified
channel is
assigned. Can assign the
channel to an
interface.
NOTE: Please be
very careful when
using this function.