Verilink PRISM 3021 (34-00262) Product Manual - Manual (Page 43)

Terminal Operation 4-21 PRISM 3021
M AINTENANCE R ESET
This field clears all user-selectable parameters, performance
registers, passwords, and alarms. All alarm threshold param-
eters are set to default values. These settings are then written
to non-volatile memory as the saved configuration.
Pressing ENTER on this field brings
up the following warning:
DELETE ALL DATA AND RESTART UNIT?
(NO!) (YES)
F ACTORY R ESET
Factory Reset removes all memory including the IP
Address.
To exit this screen without performing the reset function,
press ENTER with NO selected. To proceed with the reset
function, move the cursor to YES and press ENTER.