Verilink ConnecT 56K DSU (896-502110-001) Product Manual - Manual (Page 71)

3 = CONFIG
ConnecT 56K DS User Manual 3-41
Menu map
3=CONFIG/1=Local/2=DTE Opt./B=Secondary Rate
Operation
To display the Secondary Rate submenu of 1=LOCAL submenu of
3=CONFIG. Use the scroll buttons to display the B=Secondary Rate
press the * (Shift) key to activate the alpha selections Use the letter B to
activate the Secondary Rate submenu press the Enter key to enter the
Secondary Rate submenu resulting in the displaying of the first of the
Secondary Rate submenu items.
1=Off 2=75
3=150 4=300
Continue with standard operating procedures to select menu options. At
the end of the options the system will briefly display “Command
Accepted” and return to the active menu.
Table 3-28 Secondary Rate Commands
The Test Options menu is used to enable or disable different test modes as
well as specify the maximum test time allowed.
Front Panel
AT
Command
Description
1=OFF _Y0 No secondary channel selected
2=75 _Y1 Secondary channel rate: 75Bps
3=150 _Y2 Secondary channel rate: 150 Bps
4=300 _Y3 Secondary channel rate: 300 Bps
5=600 _Y4 Secondary channel rate: 600 Bps
6=1.2K _Y5 Secondary channel rate: 1200
Bps
7=2.4K _Y6 Secondary channel rate: 2400
Bps
3=Test options