Triplett 9007 - Manual (Page 5)

Page 4
precaution may result in damage to the meter or injury to
the user.
2.10 Make sure test leads are properly inserted and seated in the
meter’s input jacks. A loose test lead may cause the user
to believe that no hazard exists, when in fact, dangerous
voltages or currents may be present. Failure to observe
this precaution may result in damage to the meter or injury
to the user.
2.11 Do not touch the tips of the test leads when making a
measurement. Do not touch live circuitry when making a
measurement. Failure to observe this precaution may result
in damage to the meter or injury to the user.
2.12 Before using the meter, examine both the meter and the test
leads for damage. Do not use the meter if damage (damaged
insulation, exposed metal, cracked case, burnt smell, etc.) is
evident. Failure to observe this precaution may result in
damage to the meter or injury to the user.
2.13 Insert the test leads in the jacks specified in the instructions
for performing particular tests. Inserting the test leads in
incorrect jacks can damage the meter and/or injure the user.