Triplett 9007 - Manual (Page 21)

Page 20
Overload Protection: All ranges 250V DC or AC RMS.
* On 200M Ohm range, it is normal for the meter to
display 10 LSD with the test leads shorted together.
To obtain an accurate reading, subtract 10 LSD from
the displayed value.
Capacitance
2.000nF
20.00nF
200.0nF
2.000uF
Overload Protection: All ranges 250V DC or AC RMS.
200.0uF
Diode Test and Continuity Beeper
Range Display Notes
Forward DC current about 1mA
Open circuit voltage about 2.8V
Actual diode
voltage
in volts
Does not
display
resistance
accurately
Beeper sounds if Continuity
Resistance is less than
10 to 30 OhmsΩ
Overload Protection: 250V DC or AC RMS.
Range Resolution Accuracy
1pF
10pF
0.1nF
1nF
0.1uF
± (4.0% rdg + 70 digits)
± (4.0% rdg + 3 digits)
<20uF, ± (5% rdg + 10 digits)
>20uF, unspecified